/* ***************************************************** */

#include

void delay(unsigned char n); //函數delay()存在 文件delay.c

中

code unsigned song[]={

0x82,0x01,0x81,0x94,0x84,0xB4,0xA4,0x04,0x82,0x01,0x81,

0x94,0x84,0xC4,0xB4,0x04, 0x82,0x01,0x81,0xF4,0xD4,0xB4,

0xA4,0x94,0xE2,0x01,0xE1,0xD4,0xB4,0xC4,0xB4,0x04,

0x82,0x01,0x81,0x94,0x84,0xB4,0xA4,0x04,0x82,0x01,0x81,

0x94,0x84,0xC4,0xB4,0x04, 0x82,0x01,0x81,0xF4,0xD4,0xB4,

0xA4,0x94,0xE2,0x01,0xE1,0xD4,0xB4,0xC4,0xB4,0x04,

0x00};

code int note[]={

0x0000,0xFB03,0xFB8E,0xFC0B,0xFC43,0xFCAB,0xFD08,0xFD32,

0xFD81,0xFDC7,0xFE05,0xFE21,0xFE55,0xFE83,0xFE99,0xFEC0};

unsigned char i=0;

unsigned char hi_note,low_note;

static void timer1_isr(void) interrupt TF1_VECTOR using 2

{

TR1=0;

TL1=low_note;

TH1=hi_note;

TR1=1;

P3_7=3_7;

}

static void timer1_initialize(void)

{

EA=0;

TR1=0;

TMOD = 0X10;

ET1=1;

EA=1;

}

void singing()

{

unsigned char beat,temp;

i=0;

do {

temp=song[i]; // 讀出樂譜的一個byte

if (temp==0) { // 如果是0就表示音樂結束

TR1=0; // 停止計時計數器1

return; // 返回

}

beat=temp & 0x0f; //取出低階的4位，這是拍子

temp=(temp >> 4) & 0x0f; //取出高階4位當成音符的頻率

if (temp==0) TR1=0; //如果拍子是0就表示休止符

else {

hi_note=note[temp] >> 8; //根據音符的頻率得到Timer1計數值

low_note=note[temp] & 0x00FF;

TR1=1; //啟動計時計數器1

}

delay(beat); // 延遲拍子的時間

i++;

} while(1);

}

void main (void) {

timer1_initialize();

do {

singing();

} while (1); // 無窮循環

}