//P4 數據口 P3.7---E P3.6---RW P3.5----RS
#include"msp430x14x.h"
#define uint unsigned int
#define rw(x) P3OUT=(P3OUT&(~BIT6))|(x?BIT6:0);

unsigned char table0[]="hankouxueyuan";
unsigned char table1[]="dianzisheji";

//**************延時***********************************
void delay(uint z)
{
uint t,y;
for(t=z;t>0;t--)
for(y=110;y>0;y--);
}

//*******寫命令*****************************************
void write_com(unsigned char com)
{
P3OUT&=~BIT5;//作為RS選擇端低電平有效
rw(0);
P3OUT|=BIT7;
delay(10);
P4OUT=com;
//P4OUT=com;
//P3OUT|=BIT7;
delay(15);
P3OUT&=~BIT7;
}

//*******寫數據***************************************************
void write_data(unsigned char date)
{
P3OUT|=BIT5;//作為RS選擇端高電平有效勞
rw(0);
P3OUT|=BIT7;
delay(10);
P4OUT=date;
//delay(15);
//P4OUT=date;
//P3OUT|=BIT7;作為E選擇端=1;
delay(15);
P3OUT&=~BIT7;
}

//********初始化******************************************
void init()
{
P3DIR=0xff;//P3輸出 作控制口
P3SEL=0;
P3OUT=0x00;

P3OUT&=~BIT7;//E
P3OUT&=~BIT5;//RS

P4DIR=0XFF;//P4輸出 作數據口
P4SEL=0;
P4OUT=0X00;
write_com(0x38);//顯示模式設置
write_com(0x0c);//開顯示，不顯光標
write_com(0x06);//數據地址指針
write_com(0x01);//清屏
//_BIS_SR(GIE);//兩個開總中斷的方法隨便用哪一個
// _EINT();
}

//************顯示函數2********************
display2(unsigned char x,unsigned char *p)
{
unsigned char y=0; //y要給其初值0否則出亂碼
write_com(x);
while(p[y]!=0x00)
{
write_data(p[y]);
y++;
delay(15);
}
}

//***************主函數****************************************************
void main()
{
WDTCTL=WDTPW+WDTHOLD; //關看門狗
init();
while(1)
{
display2(0x80+0x01,table0);
display2(0x80+0x40+0x01,table1);
}
}