本次設計的模擬出租車計價器系統單價為1.5元/公里，起步價為4元。

程序源代碼（部分）：

#include
#define uint unsigned int
#define uchar unsigned char
sbit dancheng=P1^0;
sbit wangfan=P1^1;
sbit zhongdian=P1^2;
sbit qingling=P1^3;
uchar tt,num,JE1,JE2,JE3,JE4,LC1,LC2,LC3,LC4;
float danjia;
uint num1,num2,num3,tt1,num_sudu;
uchar code table[]={ //共陰極數碼管顯示字碼
0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,
0x39,0x5e,0x79,0x71};
void delay(uint i)//延時
{
uint x;
while(i--)
for(x=0;x<10;x++);
}
void zhuanhuan()//數據轉換
{
LC1=num1/1000;
LC2=num1%1000/100;
LC3=num1%1000%100/10;
LC4=num1%10;
JE1=num2/1000;
JE2=num2%1000/100;
JE3=num2%1000%100/10;
JE4=num2%10;

}
void main()
{
EA=1;
//EX0=1;
IT0=1;
TMOD=0x11; //time0，time1，16位定時器模式
TH0=0x00;
TL0=0x00;

TH1=(65536-50000)/256;
TL1=(65536-50000)%256;
ET1=1; //允許定時器中斷
TR1=1; //啟動
num=0;
num1=0;
num2=0;
danjia=0;
while(1)
{
if(dancheng==0) //單程計價按鍵控制
{
EX0=1;
danjia=1.5;//設置1.5元每公里
}
while(!dancheng);

。。。。。。

。。。。。。