前一段時間在玩xilinx送我在跑XUPV5-LX110T，首先跑xilinx給出的XUPV5-LX110T的demo設計，結果發現遇到了一些錯誤但是自己在網上發現很少有答案，就把自己的一些總結貼出來：

(1)xupv5_bsb_std_ip時出現了問題，其錯誤描述如下：

[xupv5_bsb_system.ucf(1110)]: NET xps_iic_0_Gpo_pin not found. Please

verify that:

1. The specified design element actually exists in the original design.

2. The specified object is spelled correctly in the constraint source file.

IOSTANDARD=LVCMOS33;> [xupv5_bsb_system.ucf(1111)]: NET xps_iic_0_Gpo_pin

not found. Please verify that:

1. The specified design element actually exists in the original design.

2. The specified object is spelled correctly in the constraint source file.

make: *** [__xps/xupv5_bsb_system_routed] Error 1

解決辦法：打開xupv5_bsb_std_ip文件夾里面的xupv5_bsb_system.mhs文件，

在其80行的位置，將PORT xps_iic_0_Gpo_pin = xps_iic_0_Gpo, DIR = O, VEC = [31:31]注釋掉(即在前面加上#即可)或刪除。

在其551行的位置，將 PORT Gpo = xps_iic_0_Gpo注釋掉(即在前面加上#即可)或刪除。

保存該文件。

然后打開xupv5_bsb_std_ip文件夾里面的xupv5_bsb_system.ucf文件

在其1110行和1111行的位置，將Net xps_iic_0_Gpo_pin LOC=AK6; # DVI_RESET_B

Net xps_iic_0_Gpo_pin IOSTANDARD=LVCMOS33;兩行刪除或者注釋掉。

保存該文件即可。

(2).Running DRCs for OSes, Drivers and Libraries ...

Runnning DRC for lwIP library...

ERROR:MDT - issued from TCL procedure ::sw_lwip_v3_00_a::lwip_drc line 12

lwip () - No Ethernet MAC cores are addressable from processor ppc440_0.

lwIP requires atleast one EMAC (xps_ethernetlite | xps_ll_temac) core.

ERROR:MDT - Error while running DRC for processor ppc440_0...

make: *** [ppc440_0/lib/libxil.a] Error 2

Done!

看到了這個問題，首先要學會自己找，上面明顯提示是lwip出錯，我們看一下datasheet就會發現： lwIP provides an easy way to add TCP/IP-based networking capability to an embedded systemlwip_v3_00_a in EDK provides adapters for the xps_ethernetlite and xps_ll_temac

Xilinx? Ethernet MAC cores, and is based on the lwIP stack version 1.2.0. This document

describes how to use lwip_v3_00_a to add networking capability to embedded software. 我們知道了它的作用，那就找吧，反正，xilinx里面是以mhs和mss文件為主線，那就行動吧

解決辦法：在mss文件里找到# BEGIN LIBRARY

PARAMETER LIBRARY_NAME = lwip

PARAMETER LIBRARY_VER = 3.00.a

PARAMETER PROC_INSTANCE = microblaze_0

PARAMETER api_mode = SOCKET_API

END

將其注釋掉或者刪除。

(3).ERROR: Failed to add write permission for

D:..microblaze_0libsrclcd_ip_v1_00_a

ERROR:Failed to copy

D:..driverslcd_ip_v1_00_asrc to

D:..microblaze_0libsrclcd_ip_v1_00_a

Copying files for driver cpu_v1_11_b from

D:Xilinx11.1EDKswXilinxProcessorIPLibdriverscpu_v1_11_bsrc to

ERROR: Error while running Copy Files for processor microblaze_0...

make: *** [microblaze_0/lib/libxil.a] Error 2

Done!

解決辦法：到桌面右鍵單擊我的電腦，選擇屬性，再選擇高級這一欄，單擊環境變量，在新彈出的環境變量對話框下，單擊系統變量的新建按鈕，輸入變量名：CYGWIN

在變量值中輸入：nontsec，單擊OK，重新啟動XPS，重新編譯即可。

(4).ERROR:EDK - D:Xilinxsamplexupv5_bsb_std_ipxupv5_bsb_system.mhs line 392 - PARAMETER C_LEFT_POS has value 7 which does not fall in the range (0:C_SPLIT-1), specified in MPD

ERROR:EDK - D:Xilinxsamplexupv5_bsb_std_ipxupv5_bsb_system.mhs line 393 - PARAMETER C_SPLIT has value 31 which does not fall in the range (1:C_SIZE_IN-1), specified in MPD

ERROR:EDK - D:Xilinxsamplexupv5_bsb_std_ipxupv5_bsb_system.mhs line 392 - PARAMETER C_LEFT_POS has value 7 which does not fall in the range (0:C_SPLIT-1), specified in MPD

ERROR:EDK - D:Xilinxsamplexupv5_bsb_std_ipxupv5_bsb_system.mhs line 393 - PARAMETER C_SPLIT has value 31 which does not fall in the range (1:C_SIZE_IN-1), specified in MPD

解決辦法：This error can be safely ignored as it is being generated incorrectly. The project will implement.

官方給出的答復是忽略這個錯誤。

(5).WARNING:EDK:2099 - PORT:I_ADDRTAG CONNECTOR:ilmb_M_ADDRTAG -

D:Xilinx11.1EDKhwXilinxProcessorIPLibpcoresmicroblaze_v7_20_adatamic

roblaze_v2_1_0.mpd line 232 - floaTIng connecTIon!

WARNING:EDK:2099 - PORT:D_ADDRTAG CONNECTOR:dlmb_M_ADDRTAG -

D:Xilinx11.1EDKhwXilinxProcessorIPLibpcoresmicroblaze_v7_20_adatamic

roblaze_v2_1_0.mpd line 273 - floaTIng connecTIon!

WARNING:EDK:2099 - PORT:HostMiimSel CONNECTOR:host_mii_sel -

D:Xilinx11.1EDKhwXilinxProcessorIPLibpcoresxps_ll_temac_v2_00_adatax

ps_ll_temac_v2_1_0.mpd line 264 - floating connection!