色婷婷AⅤ一区二区三区|亚洲精品第一国产综合亚AV|久久精品官方网视频|日本28视频香蕉

          新聞中心

          EEPW首頁 > 嵌入式系統 > 設計應用 > 嵌入式Linux開發環境的搭建之:U-Boot移植

          嵌入式Linux開發環境的搭建之:U-Boot移植

          作者: 時間:2013-09-13 來源:網絡 收藏

          本文引用地址:http://cafeforensic.com/article/257139.htm

          (7)加入NandFlash的初始化函數(board/fs2410/fs2410.c)。

          #if(CONFIG_COMMANDSCFG_CMD_NAND)

          typedefenum

          {

          NFCE_LOW,

          NFCE_HIGH

          }NFCE_STATE;

          staticinlinevoidNF_Conf(u16conf)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          nand->NFCONF=conf;

          }

          staticinlinevoidNF_Cmd(u8cmd)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          nand->NFCMD=cmd;

          }

          staticinlinevoidNF_CmdW(u8cmd)

          {

          NF_Cmd(cmd);

          udelay(1);

          }

          staticinlinevoidNF_Addr(u8addr)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          nand->NFADDR=addr;

          }

          staticinlinevoidNF_SetCE(NFCE_STATEs)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          switch(s)

          {

          caseNFCE_LOW:

          nand->NFCONF=~(111);

          break;

          caseNFCE_HIGH:

          nand->NFCONF|=(111);

          break;

          }

          }

          staticinlinevoidNF_WaitRB(void)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          while(!(nand->NFSTAT(10)));

          }

          staticinlinevoidNF_Write(u8data)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          nand->NFDATA=data;

          }

          staticinlineu8NF_Read(void)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          return(nand->NFDATA);

          }

          staticinlinevoidNF_Init_ECC(void)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          nand->NFCONF|=(112);

          }

          staticinlineu32NF_Read_ECC(void)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          return(nand->NFECC);

          }

          #endif

          /*

          *NANDflashinitialization.

          */

          #if(CONFIG_COMMANDSCFG_CMD_NAND)

          externulongnand_probe(ulongphysadr);

          staticinlinevoidNF_Reset(void)

          {

          inti;

          NF_SetCE(NFCE_LOW);

          NF_Cmd(0xFF);/*resetcommand*/

          for(i=0;i10;i++);/*tWB=100ns.*/

          NF_WaitRB();/*wait200~500us;*/

          NF_SetCE(NFCE_HIGH);

          }

          staticinlinevoidNF_Init(void)

          {

          #defineTACLS0

          #defineTWRPH04

          #defineTWRPH12

          NF_Conf((115)|(014)|(013)|(112)

          |(111)|(TACLS8)|(TWRPH04)|(TWRPH10));

          /*1111,1xxx,rxxx,rxxx*/

          /*En512B4stepECCRnFCE=HtACLStWRPH0tWRPH1*/

          NF_Reset();

          }

          voidnand_init(void)

          {

          S3C2410_NAND*constnand=S3C2410_GetBase_NAND();

          NF_Init();

          #ifdefDEBUG

          printf(NANDflashprobingat0x%.8lXn,(ulong)nand);

          #endif

          printf(%4luMBn,nand_probe((ulong)nand)>>20);

          }

          #endif

          (8)修改GPIO配置(board/fs2410/fs2410.c)。

          /*setuptheI/Oports*/

          gpio->GPACON=0x007FFFFF;

          gpio->GPBCON=0x002AAAAA;

          gpio->GPBUP=0x000002BF;

          gpio->GPCCON=0xAAAAAAAA;

          gpio->GPCUP=0x0000FFFF;

          gpio->GPDCON=0xAAAAAAAA;

          gpio->GPDUP=0x0000FFFF;

          gpio->GPECON=0xAAAAAAAA;

          gpio->GPEUP=0x000037F7;

          gpio->GPFCON=0x00000000;

          gpio->GPFUP=0x00000000;

          gpio->GPGCON=0xFFEAFF5A;

          gpio->GPGUP=0x0000F0DC;

          gpio->GPHCON=0x0018AAAA;

          gpio->GPHDAT=0x000001FF;

          gpio->GPHUP=0x00000656

          c語言相關文章:c語言教程


          linux相關文章:linux教程




          評論


          相關推薦

          技術專區

          關閉