色婷婷AⅤ一区二区三区|亚洲精品第一国产综合亚AV|久久精品官方网视频|日本28视频香蕉

          新聞中心

          EEPW首頁 > 嵌入式系統 > 設計應用 > 單片機的動手實踐篇--51單片機玩轉12864

          單片機的動手實踐篇--51單片機玩轉12864

          作者: 時間:2017-01-10 來源:網絡 收藏

            液晶的驅動和1602的類似,只不過是多了幾個擴展的功能,不如畫圖功能:

          本文引用地址:http://cafeforensic.com/article/201701/342707.htm

            這里講一下:不要簡單的認為是y軸64,x為128,那是點陣的分布,不是讀寫的分布,如正圖表示,y軸的32行,從0到31,x軸的16 從0到15,0到7為上半個屏幕,8到15在下半個屏幕,所以繪圖的時候,有兩個部分要進行書寫

            在上載入任意一幅圖:

            示例代碼:

            #include

            #define uint unsigned int

            #define uchar unsigned char

            sbit lcdrs = P2^4;//數據還是指令的選擇端口

            sbit lcdwr = P2^5;//讀寫操作端口

            sbit lcden = P2^6;//使能端延時端口

            sbit PSB = P2^1;//串行數據還是并行數據的選擇段

            //圖片的編碼,這幅圖片的編碼是一個哆啦a夢

            unsigned char code pic1[] = { /* 0X10,0X01,0X00,0X80,0X00,0X40, */

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFC,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XF8,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X3F,0XC0,0X0F,0XC0,0X0F,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X07,0XFF,0X00,0X07,0X80,0X03,0XFE,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X3F,0XFE,0XF7,0XFF,0XFF,0XFF,0XFF,0XC0,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0XFF,0XFE,0X00,0X01,0X80,0X01,0XFF,0XF8,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X03,0XFF,0XFE,0X00,0X03,0XFF,0X01,0X0F,0XFE,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X0F,0XFF,0X83,0X00,0X07,0XFB,0X86,0X00,0XFF,0X80,0X00,0X00,0X00,0X00,

            0X00,0X00,0X1F,0XFE,0X00,0XE0,0X0F,0XFF,0XFC,0X00,0X1F,0XC0,0X00,0X00,0X00,0X00,

            0X00,0X00,0X7F,0XF8,0X00,0X3F,0XE3,0XFF,0X00,0X00,0X07,0XF0,0X00,0X00,0X00,0X00,

            0X00,0X00,0XFF,0XE0,0X00,0X00,0X00,0X38,0X00,0X00,0X01,0XF8,0X00,0X00,0X00,0X00,

            0X00,0X01,0XFF,0XC7,0X7F,0XF0,0X00,0X0C,0X00,0X1F,0XFF,0XFC,0X00,0X00,0X00,0X00,

            0X00,0X01,0XFF,0X00,0X00,0X00,0X00,0X04,0X00,0X00,0X00,0X7E,0X00,0X00,0X00,0X00,

            0X00,0X03,0XFF,0X00,0X00,0X00,0X00,0X06,0X00,0X03,0XC0,0X3E,0X00,0X00,0X00,0X00,

            0X00,0X03,0XFE,0X0F,0XFF,0XF0,0X00,0X02,0X00,0X0C,0X3F,0X9E,0X00,0X00,0X00,0X00,

            0X00,0X07,0XFC,0X00,0X00,0X00,0X00,0X02,0X00,0X00,0X00,0X1F,0X00,0X00,0X00,0X00,

            0X00,0X07,0XFC,0X00,0X1F,0XC0,0X00,0X02,0X00,0X00,0X00,0X0F,0X00,0X00,0X00,0X00,

            0X00,0X07,0XF8,0X03,0XE0,0X00,0X00,0X02,0X00,0X07,0XFE,0X0F,0X00,0X00,0X00,0X00,

            0X00,0X07,0XF8,0X1E,0X00,0X00,0X00,0X02,0X00,0X00,0X01,0XC6,0X00,0X00,0X00,0X00,

            0X00,0X07,0XF8,0X30,0X00,0X00,0X00,0X02,0X00,0X00,0X00,0X06,0X00,0X00,0X00,0X00,

            0X00,0X03,0XFC,0X00,0X00,0X00,0X00,0X02,0X00,0X03,0XFE,0X0E,0X00,0X00,0X00,0X00,

            0X00,0X01,0XFC,0X00,0X00,0X00,0X00,0X7F,0XC0,0X00,0X03,0X0C,0X00,0X00,0X00,0X00,

            0X00,0X01,0XFE,0X00,0X00,0X00,0X3F,0X80,0X3E,0X00,0X01,0X18,0X00,0X00,0X00,0X00,

            0X00,0X00,0XFE,0X00,0X00,0X0F,0XC0,0X00,0X01,0XF0,0X06,0X30,0X00,0X00,0X00,0X00,

            0X00,0X00,0X7F,0X00,0X01,0XE0,0X00,0X00,0X00,0X1F,0XF8,0X60,0X00,0X00,0X00,0X00,

            0X00,0X00,0X3F,0X80,0X04,0X00,0X00,0X00,0X00,0X00,0X00,0XC0,0X00,0X00,0X00,0X00,

            0X00,0X00,0X0F,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0X80,0X00,0X00,0X00,0X00,

            0X00,0X00,0X03,0XF0,0X00,0X00,0X00,0X00,0X00,0X00,0X06,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0XFC,0X00,0X00,0X00,0X00,0X00,0X01,0XFC,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X3F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XF8,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X3F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFE,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X01,0XFF,0XF8,0X00,0X03,0XFF,0XE0,0X1F,0XFF,0XC0,0X00,0X00,0X00,0X00,

            0X00,0X00,0X07,0XFF,0XE0,0X00,0X03,0XFF,0XC0,0X07,0XFF,0XE0,0X00,0X00,0X00,0X00,

            0X00,0X00,0X0F,0XFF,0XC0,0X00,0X00,0XFF,0X80,0X03,0XFF,0XF0,0X00,0X00,0X00,0X00,

            0X00,0X00,0X1F,0XFF,0X80,0X00,0X00,0X00,0X00,0X01,0XFF,0XF8,0X00,0X00,0X00,0X00,

            0X00,0X00,0X3F,0XFF,0X80,0X00,0X00,0X00,0X00,0X01,0XFF,0XF8,0X00,0X00,0X00,0X00,

            0X00,0X00,0X7F,0XFF,0X80,0X00,0X00,0X00,0X00,0X01,0XFF,0XFC,0X00,0X00,0X00,0X00,

            0X00,0X03,0X80,0X3F,0X80,0X0F,0XFF,0XFF,0XFC,0X01,0XFE,0X3E,0X00,0X00,0X00,0X00,

            0X00,0X06,0X00,0X0F,0XC0,0X70,0X00,0X00,0X03,0XC1,0XF8,0X07,0X00,0X00,0X00,0X00,

            0X00,0X06,0X00,0X07,0XE0,0X30,0X00,0X00,0X00,0X43,0XF8,0X03,0X00,0X00,0X00,0X00,

            0X00,0X07,0X00,0X07,0XF0,0X38,0X00,0X00,0X00,0XCF,0XFC,0X03,0X00,0X00,0X00,0X00,

            0X00,0X03,0XC0,0X1F,0XFC,0X0F,0X00,0X00,0X03,0X1F,0XFC,0X0E,0X00,0X00,0X00,0X00,

            0X00,0X00,0X7F,0XFF,0XFF,0X81,0XF0,0X00,0XFC,0XFF,0XFE,0XF8,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X1F,0XFF,0XFE,0X1F,0XFF,0X1F,0XFF,0XFC,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X1F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFC,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X1F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XF8,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X1F,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XF8,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X0F,0XFF,0X07,0XF0,0XFF,0XF0,0X7F,0X8F,0X80,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X7F,0XFF,0X83,0XE0,0XFF,0XF8,0X0F,0XBF,0XF8,0X00,0X00,0X00,0X00,

            0X00,0X00,0X01,0XDF,0XF8,0X7D,0XFF,0X7F,0X0F,0XFF,0XC7,0XFE,0X00,0X00,0X00,0X00,

            0X00,0X00,0X07,0XFF,0XF7,0X00,0X41,0XEF,0XF8,0X02,0X0F,0X78,0X00,0X00,0X00,0X00,

            0X00,0X00,0X0F,0XFF,0XCC,0X00,0X40,0X7F,0XE0,0X02,0X01,0XBF,0XE0,0X00,0X00,0X00,

            0X00,0X00,0X0F,0XFE,0X07,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,0X00,0X00,

            0X00,0X00,0X01,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFE,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X07,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X07,0XFF,0X7E,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,

            0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,

            };

            void delay1ms(uint x)//延時函數

            {

            uint i,j;

            for(i= x;i>0;i--)

            for(j=110;j>0;j--);

            }

            void write_cmd(uchar cmd)//寫指令函數

            {

            lcdrs = 0;

            lcdwr = 0;

            P0 = cmd;

            lcden = 1;

            delay1ms(5);//

            lcden = 0;

            }

            void write_date(uchar date)//寫數據函數

            {

            lcdrs = 1;

            lcdwr = 0;

            P0 = date;

            lcden = 1;

            delay1ms(5);//

            lcden = 0;

            }

            void init_12864()

            {

            PSB = 1;//確定是并行傳送

            write_cmd(0x30);//基本指令操作

            write_cmd(0x0c);//開顯示,關掉光標

            write_cmd(0x01);//清楚lcd的內容

            }

            void lcd_putpic(unsigned char code *img)//載入圖畫的函數

            {

            uint i,j;

            //顯示上半個屏幕的內容

            for(i = 0;i<32;i++)

            {

            write_cmd(0x80+i);//垂直的地址

            write_cmd(0x80);//水平的地址

            for(j=0;j<16;j++)

            {

            write_date(*img);

            img++;

            }

            }

            //顯示下半個屏幕的內容

            for(i = 0;i<32;i++)

            {

            write_cmd(0x80+i);//垂直的內容

            write_cmd(0x88);//水平的地址第三行的內容

            for(j=0;j<16;j++)

            {

            write_date(*img);

            img++;

            }

            }

            }

            void setpic()//圖像顯示模式設置函數

            {

            write_cmd(0x36);//選擇8bit的數據流,圖像顯示模式

            delay1ms(5);

            }

            main()

            {

            init_12864();//初始化液晶

            setpic();//初始化液晶圖片顯示

            lcd_putpic(pic1);//載入一幅圖片

            delay1ms(5);

            while(1);

            }

            以后載入圖片只需要將圖片用取模的軟件,注意圖片的大小必須是128x64的尺寸,否則會出現亂碼,這是個比較容易犯的錯誤,希望大家注意



          關鍵詞: 單片機 12864

          評論


          相關推薦

          技術專區

          關閉