本文介紹了LTC3675主要特性，方框圖，以及多種典型應用電路。Linear 公司的LTC3675是七路可配置大功率PMIC，包括多個輸出的電源和兩串LED驅動器。LTC3675集成了四個同步降壓DC/DC轉換器（1A/1A/500mA/500mA)，一個1A升壓轉換器和一個降壓-升壓轉換器，兩個I2C控的40V LED驅動器以及常開的25mA LDO.其中的C可編程輸出電壓，工作模式和開關節點轉換速率，主要用在5-10W大功率單個鋰離子/聚合物電池，手提工業應用，手提儀表和終端以及多輸出低壓電源。

LTC3675主要特性：

Four Monolithic Synchronous Buck DC/DCs (1A/1A/500mA/500mA)

Buck DC/DCs Can Be Paralleled to Deliver Up to 2??Current with a Single Inductor

Independent 1A Boost and 1A Buck-Boost DC/DCs

Dual String I2C Controlled 40V LED Driver

I2C Programmable Output Voltage, Operating Mode, and Switch Node Slew Rate for All DC/DCs

I2C Read Back of DC/DC, LED Driver, Fault Status

I2C Programmable VIN and Die Temperature Warnings

Maskable Interrupts to Report DC/DC, VIN and Die Temperature Faults

Pushbutton ON/OFF/RESET

Always-On 25mA LDO

Low Quiescent Current: 16μA (All DC/DCs Off)

4mmx?7mmx?0.75mm 44-Lead QFN Package

LTC3675應用：

High Power (5W to 10W) Single Cell Li-Ion/Polymer Applications

Portable Industrial Applications, Handy Terminals, Portable Instruments

Multioutput Low Voltage Power Supplies

圖1。LTC3675方框圖

圖2。LTC3675演示板外形圖

圖3。LTC3675應用電路圖

圖4。LTC3675降壓應用電路圖

圖5。LTC3675降壓穩壓器和高壓升壓穩壓組合應用電路圖